[1]高德利,黃文君,劉永升,等.鉆柱力學與套管磨損預測若干研究進展[J].石油管材與儀器,2020,6(04):1-9.[doi:10.19459/j.cnki.61-1500/te.2020.04.001]
 GAO Deli,HUANG Wenjun,LIU Yongsheng,et al.Some Research Advances in Drill String Mechanics and Casing Wear Prediction for Well Engineering[J].Petroleum Tubular Goods & Instruments,2020,6(04):1-9.[doi:10.19459/j.cnki.61-1500/te.2020.04.001]
點擊復制

鉆柱力學與套管磨損預測若干研究進展
分享到:

《石油管材與儀器》[ISSN:2096-0077/CN:61-1500/TE]

卷:
6
期數:
2020年04期
頁碼:
1-9
欄目:
綜 述
出版日期:
2020-08-20

文章信息/Info

Title:
Some Research Advances in Drill String Mechanics and Casing Wear Prediction for Well Engineering
文章編號:
2096-0077(2020)04--0001-09
作者:
高德利黃文君劉永升譚雷川
中國石油大學(北京),石油工程教育部重點實驗室 北京 102249
Author(s):
GAO DeliHUANG WenjunLIU YongshengTAN Leichuan
MOE Key Laboratory of Petroleum Engineering, China University of PetroleumBeijing, Beijing 102249, China
關鍵詞:
油氣井鉆井與完井鉆柱力學管柱屈曲套管磨損振動
Keywords:
oil & gas wellsdrilling and completion drill string mechanics tubular buckling casing wear vibration
分類號:
TE21
DOI:
10.19459/j.cnki.61-1500/te.2020.04.001
文獻標志碼:
A
摘要:
隨著油氣勘探開發活動向著深層、深水及非常規等復雜領域的不斷擴展,鉆井面臨的井況與約束條件更加苛刻,鉆柱的力學行為更加復雜,失效問題頻發。針對鉆柱屈曲、鉆柱動態特性及套管磨損等復雜鉆井力學問題,綜合分析了國內外的研究進展、不足之處及未來發展趨勢,介紹了筆者團隊的一些相關研究成果。目前,鉆柱屈曲研究基本上還停留在靜力學范疇,今后有必要加強動力屈曲問題的研究;鉆柱動力學的研究重點逐漸轉移到多重耦合非線性振動問題,需要探討更加高效的求解算法;現場實測的套管磨損形狀非常復雜,需要建立更加準確的套管磨損預測模型。通過綜合闡述這些研究進展,以期為復雜鉆完井工程優化設計與安全高效作業控制提供有益參考。
Abstract:
With oil and gas exploration and development activities expanding into deep earth, deepwater and unconventional areas, downhole conditions for drilling and completion are more critical, and mechanical behaviors of downhole tubular strings are more complicated and failure phenomena occur frequently. This paper focuses on advances of three aspects including drill string buckling, drill string dynamics and casing wear prediction. It summarizes the overall research progress at home and abroad, points out the current research deficiencies and future development trends, and introduces our team′s research achievements. It is indicated that current researches on drill string buckling mainly belong to statics, and the next step is to strengthen the study of dynamic buckling. Researches of drill string dynamics are gradually shifted to multiple coupled nonlinear vibration problems, requiring more efficient solution algorithms. Casing wear shape measured in practice is very complicated, therefore more accurate casing wear prediction models are needed. The review of these research advances is expected to provide a beneficial reference for the optimal design and the safe & efficient operation control in drilling & completion engineering under complicated conditions.

參考文獻/References:

[1] 高德利.油氣井管柱力學與工程[M]. 東營:中國石油大學出版社,2006.
[2] 高德利.復雜井工程力學與設計控制技術[M]. 北京:石油工業出版社,2018.
[3] GAO D L, HUANG W J. A review on downhole tubular string buckling in well engineering[J]. Petroleum Science,2015,12(3):443-457.
[4] LUBINSKI A. A study of the buckling of rotary drilling strings[J]. Drilling & Production Practice API, 1950,(5):178-214.
[5] LUBINSKI A, ALTHOUSE W S. Helical buckling of tubing sealed in packers[J]. Journal of Petroleum Technology,2013,14(6):655-670.
[6] MITCHELL R F. New concepts for helical buckling[J]. SPE Drilling Engineering,1988,3(3): 303-310.
[7] MITCHELL R F. Buckling analysis in deviated wells: a practical method[J]. SPE Drilling & Completion,1999,14(1):11-20.
[8] WU J. Slackoff load transmission in horizontal and inclined wells[C]// SPE Production Operations Symposium, Oklahoma, 1995.
[9] GAO D L, LIU F W, XU B Y. An analysis of helical buckling of long tubulars in horizontal wells[C]. SPE International Oil and Gas Conference and Exhibition in China,Beijing,1998:517-523.
[10] CUNHA J. Buckling behavior of tubulars in oil and gas wells: a theoretical and experimental study with emphasis on the torque effect[D]. Tulsa: University of Tulsa,1995.
[11] WU J. Buckling behavior of pipes in directional and horizontal wells[D]. Texas A&M University,1992.
[12] HE X J, KYLLINGSTAD A. Helical buckling and lockup conditions for coiled tubing in curved wells[J]. SPE Drilling & Completion,1995,10(1):10-15.
[13] QUI W Y, MISKA S, VOLK L. Drill pipe/coiled tubing buckling analysis in a hole of constant curvature[C]// SPE Permian Basin Oil and Gas Recovery Conference, Midland,Texas,1998.
[14] HUANG W J, GAO D L, LIU Y H. A study of tubular string buckling in vertical wells[J]. International Journal of Mechanical Sciences.2016,118:231-253.
[15] ZHANG Q, JIANG B, XIAO Z M, et al. Buckling transition process of suspended tubulars during loading and unloading[J]. Journal of Petroleum Science and Engineering,2019,16:481-493.
[16] HUANG W J, GAO D L, LIU F W. Buckling analysis of tubular strings in horizontal wells[J]. SPE Journal, 2015, 20(2): 405-416.
[17] HUANG W J, GAO D L, WEI S L, et al. Boundary condition: a key factor in tubular string buckling[J]. SPE Journal,2015,20(6):1409-1420.
[18] GAO G, DI Q F, MISKA S, et al. Stability analysis of pipe with connectors in horizontal wells[J]. SPE Journal,2011,17(3):931-941.
[19] HUANG W J, GAO D L, LIU Y H. Interhelical and intrahelical buckling analyses of tubular strings with connectors in horizontal wellbores[J]. Journal of Petroleum Science and Engineering, 2017,152:182-192.
[20] HUANG W J, GAO D L, LIU Y H. Buckling analysis of tubular strings with connectors constrained in vertical and inclinded wellbores[J]. SPE Journal,2018,23(2):301-327.
[21] DUNAYEVSKY V, ABBASSIAN F, JUDZIS A. Dynamic stability of drillstrings under fluctuating weight on bit[J]. SPE Drilling & Completion,1993,8(2):84-92.
[22] PASLAY P R, BOGY D B. The stability of a circular rod laterally constrained to be in contact with an inclined circular cylinder[J]. Journal of Applied Mechanics,1964,31(4):605-610.
[23] CHEN Y C, LIN Y H, CHEATHAM J B. Tubing and casing buckling in horizontal wells[J]. Journal of Petroleum Technology,1990,42(2):140-191.
[24] HUANG W J, GAO D L. Combined effects of wellbore curvature, connector, and friction force on tubular buckling behaviors[J]. SPE Journal, 2019,24(5):2083-2096.
[25] MITCHELL R F. Lateral buckling of pipe with connectors in horizontal wells[J]. SPE Journal,2003,8(2):124-137.
[26] MITCHELL R F. Helical buckling of pipe with connectors in vertical wells[J]. SPE Drilling & Completion,2000,15(3):162-166.
[27] HUANG W J, GAO D L. Sinusoidal buckling of a thin rod with connectors constrained in a cylinder[J]. Journal of Natural Gas Science and Engineering,2014,18:237-246.
[28] HUANG W J, GAO D L. Helical buckling of a thin rod with connectors constrained in a cylinder[J]. International Journal of Mechanical Sciences,2014,84:189-198.
[29] HUANG W J, GAO D L. Helical buckling of a thin rod with connectors constrained in a torus[J]. International Journal of Mechanical Sciences,2015,98:14-28.
[30] DETOURNAY E, DEFOURNY P. A phenomenological model for the drilling action of drag bits[J]. International Journal of Rock Mechanics & Mining Sciences & Geomechanics Abstracts, 1992,29(1):13-23.
[31] RICHARD T, GERMAY C, DETOURNAY E. A simplified model to explore the root cause of stick-slip vibrations in drilling systems with drag bits[J]. Journal of Sound and Vibration, 2007,305(3):432-456.
[32] NAVARRO-LOPEZ E, LICEAGA-CASTRO E. Non-desired transitions and sliding-mode control of a multi-DOF mechanical system with stick-slip oscillations[J]. Chaos, Solitons and Fractals,2009, 41(4):2035-2044.
[33] 祝效華,湯歷平,童華.高頻扭轉沖擊鉆進的減振與提速機理研究[J]. 振動與沖擊,2012,31(20):75-78.
[34] 祝效華,湯歷平,孟蘋蘋,等.PDC鉆頭粘滑振動機理分析[J]. 石油礦場機械,2012,41(4):13-16.
[35] 韓春杰,閻鐵.大位移井鉆柱"粘滯-滑動"規律研究[J]. 天然氣工業,2004,24(11):88-90.
[36] 牟海維,王瑛,韓春杰.鉆柱的粘滑振動規律分析[J]. 石油機械,2011,39(3):74-76.
[37] DIVENYI S, SAVI M A, WIERCIGROCH M, et al. Drillstring vibration analysis using non-smooth dynamics approach[J]. Nonlinear Dynamics, 2012, 70(2):1017-1035.
[38] DAREING D W, TLUSTY J, ZAMUDIO C M. Self-Excited vibrations induced by drag sits[J]. Journal of Energy Resources Technology, 1990, 112(1):54.
[39] KOVALYSHEN Y. Understanding root cause of stick-slip vibrations in deep drilling with drag bits[J]. International Journal of Non-Linear Mechanics, 2014, 67: 331-341.
[40] APOSTAL M C, HADUCH G A, WILLIAMS J B. Study to determine the effect of damping on finite-element-based forced-frequency-response models for Bottomhole Assembly vibration analysis[C]//Proceedings-SPE Annual Technical Conference and Exhibition, 1990, Delta: 537-550.
[41] CHEN S L, GERADIN M. An improved transfer matrix technique as applied to BHA lateral vibration analysis[J]. Journal of Sound & Vibration, 1995, 185(1):93-106.
[42] KHULIEF Y A, AL-NASER H. Finite element dynamic analysis of drillstrings[J]. Finite Elements in Analysis and Design, 2005, 41(13): 1270-1288.
[43] RITTO T G, SOIZE C, SAMPAIO R. Non-linear dynamics of a drill-string with uncertain model of the bit-rock interaction[J]. International Journal of Non-Linear Mechanics, 2009, 44(8): 865-876.
[44] 狄勤豐,王文昌,姚永漢,等.底部鉆具組合動力學模型及渦動特性仿真[J]. 中國石油大學學報(自然科學版),2010,44(3):59-62.
[45] SOIZE C, SAMPAIO R. Computational modeling of the nonlinear stochastic dynamics of horizontal drillstrings[J]. Computational Mechanics, 2015, 56(5): 849-878.
[46] 劉永升,高德利.斜直井眼中鉆柱橫向動態運動非線性模型研究[J]. 振動與沖擊,2017,36(24):1-6.
[47] LIU Y S, GAO D L. A nonlinear dynamic model for characterizing downhole motions of drill-string in a deviated well[J]. Journal of Natural Gas Science & Engineering, 2017, 38:466-474.
[48] LIU Y S, GAO D L, TAN L C, et al. How is the dynamic of drillstring going under internal & external countercurrent-axial flows?[C] //Society of Petroleum Engineers-Abu Dhabi International Petroleum Exhibition and Conference, 2018.
[49] 劉永升.鉆柱及底部鉆具組合系統非線性動力學特性研究[D]. 北京:中國石油大學(北京),2019.
[50] RUSSEL W, LEWIS T, WRIGHT J R. Casing wear: some causes, effects and control measures[J]. World Oil, 1974, (4): 99-103.
[51] BRADLEY W B, FONTENOT J E. The prediction and control of casing wear[J]. Journal of Petroleum Technology, 1975, 27(2): 233-245.
[52] WILLIAMSON J. Casing wear: the effect of contact pressure[J]. Journal of Petroleum Technology, 1981, 33(12): 2382-2388.
[53] WHITE J P, DAWSON R. Casing wear: laboratory measurements and field predictions[J]. SPE Drilling Engineering, 1987, 2(1):56-62.
[54] HALL R W, GARKASI A, DESKINS G, et al. Recent advances in casing wear technology[C]// IADC/SPE Drilling Conference, Dallas, Texas, US, 1994. SPE-27532-MS.
[55] HALL R W, MALLOY K P. Contact pressure threshold: an important new aspect of casing wear[C]//SPE Production Operations Symposium, Oklahoma City, Oklahoma, US, 2005.
[56] 韓勇. 鉆桿接頭與套管摩擦磨損問題的理論與試驗研究[D]. 成都:西南石油大學,2002.
[57] 韓勇,歐陽春,肖國章,等.深井套管磨損的全尺寸模擬試驗[J]. 鋼管,2010,39(S1):1-10.
[58] 林元華,付建紅,施太和,等.套管磨損機理及防磨措施研究[J]. 天然氣工業,2004,24(7): 58-61.
[59] 林元華,曾德智,施太和,等.非均勻載荷下磨損套管抗擠強度研究[J]. 機械科學與技術, 2006,(5):557-559.
[60] 覃成錦,徐秉業,高德利.套管磨損后剩余抗擠強度的數值分析[J]. 石油鉆采工藝,2000,22(1):6-8,13.
[61] 覃成錦,高德利,徐秉業.含磨損缺陷套管抗擠強度的數值分析[J]. 工程力學,2001,18(2):9-13.
[62] GAO D L, SUN L Z. New method for predicting casing wear in horizontal drilling[J]. Petroleum Science and Technology, 2012,30(9):883-892.
[63] SUN L Z, GAO D L, ZHU K L. Models & tests of casing wear in drilling for oil & gas[J]. Journal of Natural Gas Science & Engineering, 2012,4(1):44-47.
[64] GAO D L, SUN L Z, LIAN J H. Prediction of casing wear in extended-reach drilling[J]. Petroleum Science, 2010, 7(4): 494-501.
[65] 譚雷川,高德利,ADEEB S,等.基于鉆柱正弦屈曲的套管磨損預測模型[J]. 中國石油大學學報(自然科學版),2019,43(4):69-74.
[66] TAN L, GAO D L, ZHOU J H. A Prediction model of casing wear in extended-reach drilling with buckled drillstring[J]. Journal of Applied Mechanics, 2018, 85(2), 1001-1011.
[67] TAN L C, GAO D L, ZHOU J H, et al. Casing wear prediction model based on drill string whirling motion in extended-reach drilling[J]. Arabian Journal for Science & Engineering, 2018, 43(11), 6325-6332.
[68] TAN L C, GAO D L, ZHOU J H. Casing wear prediction with considering initial internal casing eccentricity[J]. Arabian Journal for Science & Engineering, 2018, 43(5), 2593-2603.
[69] TAN L C, GAO D L. Casing wear prediction model based on casing ellipticity in oil & gas well-drilling with complex structures[J]. Journal of Applied Mechanics, 2018, 85(10), 101005-101021.

相似文獻/References:

[1]陳建波.連續油管分簇射孔技術發展現狀[J].石油管材與儀器,2017,3(03):7.[doi:10.19459/j.cnki.61-1500/te.2017.03.002]
 CHEN Jianbo.Current Situation of Coiled-tubing-conveyed Cluster Perforating Technology[J].Petroleum Tubular Goods & Instruments,2017,3(04):7.[doi:10.19459/j.cnki.61-1500/te.2017.03.002]

備注/Memo

備注/Memo:
基金項目:國家自然科學基金創新研究群體項目“復雜油氣井鉆井與完井基礎研究”(項目編號:51821092);國家自然科學基金石油化工聯合基金項目“頁巖和致密油氣田高效開發建井基礎研究”(項目編號:U1762214);國家自然科學基金青年基金“旋轉鉆柱動力屈曲臨界條件與后屈曲蛇形擺動和螺旋渦動行為研究”(項目編號:51904317);中國石油大學( 北京 )科研啟動基金(項目編號:ZX20180414) 第一作者簡介:高德利,男,1958年生,教授,中國科學院院士,從事油氣工程領域的教學和科研工作。E-mail:[email protected]
更新日期/Last Update: 2020-08-25
湖北新11选5开奖公告